BBP Operations Status: Click Here to View

Oxygen Analyzers

Oxygen analyzers provide valuable measurements in combustion control, process quality, safety and environmental applications. These are used in a variety of measurement scenarios including, but not limited to, boiler trimming in power plants, furnace optimization in refinery and petrochemical applications, process safety in vent headers, and product quality in ethylene production.

Featured Solutions

  • oxy.IQ_Galvanic_Fuel_Cell_Oxygen_Transmitter1

    The oxy.IQ is a highly reliable and cost-effective two-wire, loop-powered transmitter with a linearized 4 to 20 mA output. It measures oxygen in ten ppm ranges and seven percentage ranges. All ranges are user-selectable. This compact transmitter uses an advanced galvanic fuel cell that provides superior performance, accuracy, stability and a long life, even in hazardous environments.

    The rugged oxy.IQ is controlled by a microprocessor that enables the user to select the range, trim outputs and perform calibration. Programming is easily done using the keypad and display. The compact oxy.IQ is designed to fit easily into any installation site and can be installed right at the sampling point.

    The oxy.IQ’s oxygen sensor is an advanced galvanic fuel cell that provides superior performance, accuracy, stability and long life. The cell’s innovative design eliminates the potential for negative signal output, reduces sources of contamination. The cell is unaffected by other background gases or hydrocarbons and some models are compatible with acid gases. Recovery from air at low ppm levels takes just a few minutes. Because the cell is self-contained, minimal maintenance is required. There is no electrolyte to change or electrodes to clean.

    The Panametrics oxy.IQ is ideal for applications such as:

    • Glove box purge and leak detection
    • Natural gas
    • Semiconductor wafer machines
    • Coating process machines
    • Membrane air separators
    • Inert welding gases
    • Pure gaseous hydrocarbon streams
    • Process monitoring of gaseous monomers
    • Heat treating and bright annealing

    Features

    • User-selectable ranges for ppm & percent oxygen
      • Up to 10,000ppm or 50%
    • Two-wire, loop-powered 4 to 20mA transmitter
    • ±1% of range accuracy at calibration point
    • Proven galvanic fuel cell O2 sensor technology
    • User-friendly, intuitive interface with diagnostics
    • 1/8in NPT process connection at inlet and outlet
    • Microprocessor-based, all-digital technology
    • Low maintenance, economical and compact
    • Sensor failure output error
    • Sensor lifetime indication
    • NAMUR error indication
    • Intrinsically safe options available
      • US/CAN Class 1, Div 1, Groups ABCD, T4; ATEX / IECEx Ex ia IIC Ga T4
      • Adds 3 to 4 weeks to lead time

    Learn about other Oxygen Analyzers like the oxy.IQ available at BBP here.

    DOWNLOAD BROCHURE
  • TDLS80001

    Yokogawa’s new TDLS8000 houses all of the industry’s leading features in one robust device. The platform design is for in situ measurements which negate the need for sample extraction and conditioning. The non-contacting sensor allows for a variety of process types including corrosive, abrasive and condensing. The first generation platform has been proven in many others for the measurements of O2, CO, CH4, NH3, H2O and many more NIR absorbing gases. This second generation platform has improved reliability and ease of installation and maintenance while still meeting or exceeding designed application demands.

    Analytical system integration is one of Yokogawa’s core competencies. With a broad network of analyzer integration centers and best in class gas chromatography labs, Yokogawa is a leading analytical solution provider for analyzer integration solutions and service. With major centers and labs in Singapore, the United States and Europe, along with local analyzer integration capabilities around the globe, Yokogawa is committed to provide timely application support anywhere in the world. To provide our customers with even greater measurement accuracy, operational efficiency and safety, Yokogawa is pleased to offer the latest in tunable diode laser spectrometer technology. The TDLS8000. 

    With the experience gained from thousands of installations used in a variety of of applications and industries we have created the next generation platform to give our customers their most needed features combined in on analyzer. Enabled by TruePeak technology the original Yokogawa TDLS200 gas analyzer platform was the first tunable diode laser spectrometer designed with the flexibility to be applicable to most industrial processes. Including fire heater safety and optimization, limiting oxygen control and managing ammonia slip for SCR optimization. Now the most trusted laser analyzer on the market just got better. While the original platform was designed through multiple United States Departments of Energy programs for specific applications in the petrochemical industry, the flexible nature of the TDLS8000 enables easy adaptation to the gas measurements needed across a variety of todays complex industries. Yokogawa’s TDLS8000 houses all of the industries leading features in one robust device. 

    • SIL 2 rated to meet the requirements of your most demanding safety systems
    • A compact design for one man installation without sacrificing ruggedness
    • HART and MODBUS TCP communications standard for easy of maintenance and integration
    • An intuitive touch screen HMI for faster set-up
    • 8 stages of auto gain adaptation for touch free transmission optimization
    • 50 days of data and spectral storage in an onboard historian allows remote factory troubleshooting. 

    All hardware is fully field repairable to minimize downtime and configuration data is stored on our unique smart laser module. This smart laser module with integral line locking ensures the integrity of the measurement and also stores configuration data reducing the time needed to commission or replace. The TDLS8000 provides an analysis and eliminates the need for conventional sampling systems which require frequent and extensive maintenance. The TDLS8000 combines Yokogawa’s proven processing experience with the industry leading TruePeak measurement technology to provide a fast , reliable, interference free measurement for safe and accurate gas analysis. Yokogawa is committed to developing innovative solutions that provide value and piece of mind for our customers. As the worlds best analytical system integration provider, Yokogawa is ready to help you maximize safety, improve operational efficiency and reduce your costs. 

    Learn about other Oxygen Analyzers available at BBP here.

    DOWNLOAD BROCHURE
  • GasMeasurement_OxygenAnalysis_xmo2-oxygen-transmitter

    The XMO2 transmitter is a compact, rugged, online transmitter that provides computer-enhanced, drift-free oxygen measurement. It can be used wherever accurate and reliable long-term oxygen measurement is critical to process and product quality. This includes inserting/blanketing liquid storage tanks, reactor feed gases, flare gas, catalyst regeneration, oxygen purity, and many other applications. The XMO2 thermoparamagnetic oxygen transmitter is the most stable oxygen analyzer available on the market today. It represents the state of the art in oxygen measurement. With this product, reliable process oxygen measurement can be as easy as temperature or pressure measurement. Learn more about gas analytical products from BBP.

    DOWNLOAD BROCHURE
  • Integral Oxygen Analyzer ZR202

    The ZR202 is an integral oxygen analyzer that is an intelligent, rebuildable, low-cost measurement device for in-situ humidity measurement. This smart probe features a local LCD display and infrared push-button operation for local adjustment of the instrument and calibration control. HART communication protocol allows easy configuration of the instrument as well as “up to the second” information on all process variables and diagnostic tools. The EXAxt ZR202 transmitter / detector combines benefits of the ZR402 remote analyzer and the ZR22 detector into an intelligent, rebuildable, low-cost measurement device for in-situ humidity measurement. This smart probe features a local LCD display and infrared push-button operation for local adjustment of the instrument and calibration control. HART communication protocol allows easy configuration of the instrument as well as up to the second information on all process variables and diagnostic tools. The Yokogawa ZR202 smart probe offers customers a lower cost of product ownership by significantly reducing installation costs from tubing, wiring, and conduit.

    DOWNLOAD BROCHURE
  • Single Channel Oxygen Analyzer System ZR22/ZR402

    The ZR22/ZR402 is a single channel oxygen analyzer system that is used for combustion monitoring and control in a wide variety of applications, helping to make considerable achievements in energy saving. Combustion monitoring and control using the analyzer also contribute to a lowering of CO2, SOx and NOx emissions by allowing for more complete combustion, thus preventing global warming and air pollution. Yokogawa’s zirconia oxygen analyzers are used for combustion monitoring and control in a wide variety of applications and help industries to make considerable achievements in energy saving. The applications range from energy-consuming industries, such as iron and steel, electric power, oil and petrochemical, ceramics, pulp and paper, food, and textiles, to various combustion facilities, such as incinerators and small- and medium-sized boilers. Combustion monitoring and control using the analyzer also contribute to a lowering of CO2, SOx, and NOx emissions by allowing for more complete combustion, thus preventing global warming and air pollution.

    DOWNLOAD BROCHURE

Sales Inquiries & Customer Support

(800) 299-4142