BBP Operations Status: Click Here to View

Field Wireless – ISA100

Our field wireless solutions allow for process measurements that were previously too difficult or uneconomical to implement. We offer a complete line of ISA100 compliant pressure transmitters including transmitters that can measure differential pressure, absolute pressure and gauge pressure with a variety of different process connections.

Featured Solutions

  • EJX110B

    The EJX110B is a high performance, wireless differential pressure transmitter that features a single crystal silicon resonant sensor and is suitable to measure liquid, gas, or steam pressure as well as liquid level, density, and pressure. These transmitters transmit the process variables and setting parameters using a wireless signal. They also run on internal batteries, greatly reducing the cost of installation as hard-wiring is not required. The communication is compliant with ISA100.11a protocol specifications.

    Features:

    • Long Life Battery Design
      Ultra low current consumption design using two high capacity lithium-thionyl chloride batteries provide wireless operation for years.
    • Security Assured Wireless Network Joining
      Infrared communication between the devices for wireless network configuration and parameter setting.
    • Quick Update Time
      Selectable from 0.5 second to 60 minutes for measured process value to publish wirelessly.

    Standard Specifications:

    • WIRELESS SPECIFICATIONS
      Communication protocol: ISA100.11a protocol
      Data rate: 250 kbps
      Frequency: 2400 – 2483.5 MHz license free ISM band
      Radio security: AES 128 bit codified
      RF Transmitter power: Max. 11.6 dBm
      Antenna: +2 dBi Omni directional monopole type
      Separately sold remote antenna and antenna cables
      can be used.
    • POWER SUPPLY SPECIFICATIONS
      Battery:
      Use the dedicated battery pack.
      Rated voltage: 7.2 V
      Rated capacity: 19 Ah
      External Power Source:
      Rated voltage: 10.5 to 30 V DC
      Rated current: 36 mA
    • PERFORMANCE SPECIFICATIONS
      Zero-based calibrated span, linear output, wetted
      parts material code S and silicone oil, in the
      continuous measurement mode unless otherwise
      mentioned.
      Specification Conformance
      EJX series ensures specification conformance to at
      least ±3σ.
      Reference Accuracy of Calibrated Span
      (includes terminal-based linearity, hysteresis, and
      repeatability)
    • NORMAL OPERATING CONDITION
      (Optional features or approval codes may affect
      limits.)
      Ambient Temperature Limits
      -40 to 85°C (-40 to 185°F)
      -30 to 80°C (-22 to 176°F) LCD visible range
      Process Temperature Limits
      -40 to 120°C (-40 to 248°F)
      – Except EJX310B L capsule
      -40 to 100°C (-40 to 212°F)
      – EJX310B L capsule
      Ambient Humidity Limits
      0 to 100% RH

    To learn about other Field Wireless Solutions available at BBP, click here.

    DOWNLOAD BROCHURE
  • EJX118B

    The EJX118B is a wireless diaphragm sealed differential pressure transmitter that can be used to measure liquid, gas or steam pressure as well as liquid level, density and pressure. These transmitters transmit the process variables and setting parameters using a wireless signal. They also run on internal batteries, greatly reducing the cost of installation as hard-wiring is not required. The communication is compliant with ISA100.11a protocol specifications.

    Wireless diaphragm seals are used to prevent process medium from entering directly into the pressure-sensing assembly of the differential pressure and pressure transmitters, they are connected to the transmitter using capillaries filled with fill fluid.

    Features:

    • Long Life Battery Design
      Ultra low current consumption design using two high capacity lithium-thionyl chloride batteries provide wireless operation for years.
    • Security Assured Wireless Network Joining
      Infrared communication between the devices for wireless network configuration and parameter setting.
    • Quick Update Time
      Selectable from 0.5 second to 60 minutes for measured process value to publish wirelessly.

    Standard Specifications:

    • WIRELESS SPECIFICATIONS:
      Wireless Communication
      Communication protocol: ISA100.11a protocol
      Data rate: 250 kbps
      Frequency: 2400 – 2483.5 MHz license free ISM band
      Radio security: AES 128 bit codified
      RF Transmitter power: Max. 11.6 dBm
      Antenna: +2 dBi Omni directional monopole type
      Separately sold remote antenna and antenna cables
      can be used.
    • POWER SUPPLY SPECIFICATIONS
      Battery:
      Use the dedicated battery pack.
      Rated voltage: 7.2 V
      Rated capacity: 19 Ah
      External Power Source:
      Rated voltage: 10.5 to 30 V DC
      Rated current: 36 mA
    • PERFORMANCE SPECIFICATIONS
      Zero-based calibrated span, linear output, wetted
      parts material code SW for 3-inch flange flush type,
      fill fluid code B, capillary length of 5 m, and in the
      continuous measurement mode.
      Specification Conformance
      EJX series ensures specification conformance to at
      least ±3σ.
      Reference Accuracy of Calibrated Span
      (includes terminal-based linearity, hysteresis, and
      repeatability)

    To learn about other Field Wireless solutions available at BBP, click here.

    DOWNLOAD BROCHURE
  • EJX210B

    The EJX210B is a high performance, wireless flange mounted differential pressure transmitter that features a single crystal silicon resonant sensor and is suitable to measure liquid, gas, or steam pressure as well as liquid level, density, and pressure. These transmitters transmit the process variables and setting parameters using a wireless signal. They also run on internal batteries, greatly reducing the cost of installation as hard-wiring is not required. The communication is compliant with ISA100.11a protocol specifications.

    Features:

    • Long Life Battery Design
      Ultra low current consumption design using two high capacity lithium-thionyl chloride batteries provide wireless operation for years.
    • Security Assured Wireless Network Joining
      Infrared communication between the devices for wireless network configuration and parameter setting.
    •  Quick Update Time
      Selectable from 0.5 second to 60 minutes for measured process value to publish wirelessly

    Standard Specifications:

    • WIRELESS SPECIFICATIONS
      Communication protocol: ISA100.11a protocol
      Data rate: 250 kbps
      Frequency: 2400 – 2483.5 MHz license free ISM band
      Radio security: AES 128 bit codified
      RF Transmitter power: Max. 11.6 dBm
      Antenna: +2 dBi Omni directional monopole type
      Separately sold remote antenna and antenna cables
      can be used.
    • POWER SUPPLY SPECIFICATIONS
      Battery:
      Use the dedicated battery pack.
      Rated voltage: 7.2 V
      Rated capacity: 19 Ah
      External Power Source:
      Rated voltage: 10.5 to 30 V DC
      Rated current: 36 mA
    • PERFORMANCE SPECIFICATIONS
      Zero-based calibrated span, linear output, wetted
      parts material code SW for 3-inch flange flush type,
      fill fluid code B, and in the continuous measurement
      mode.
      Specification Conformance
      EJX series ensures specification conformance to at
      least ±3σ.
      Reference Accuracy of Calibrated Span
      (includes terminal-based linearity, hysteresis, and
      repeatability)
    • NORMAL OPERATING CONDITIONS
      (Optional features or approval codes may
      affect limits.)
      Ambient Temperature Limits
      -40 to 85°C (-40 to 185°F)
      -30 to 80°C (-22 to 176°F) LCD visible range
      (Note: The ambient temperature limits must be within the
      fill fluid operating temperature range, see table 1.)
      Process Temperature Limits
      High pressure side: See table 1.
      Low pressure side: 40 to 120°C (-40 to 248°F)
      Ambient Humidity Limits
      0 to 100% RH

    To learn about other Field Wireless solutions available at BBP, click here.

    DOWNLOAD BROCHURE
  • EJX510B-EJX530B

    The EJX510B/EJX530B are high performance, wireless absolute and gauge pressure transmitters that feature a single crystal silicon resonant sensor and are suitable to measure liquid, gas, or steam pressure as well as liquid level, density, and pressure. These transmitters transmit the process variables and setting parameters using a wireless signal. They also run on internal batteries, greatly reducing the cost of installation as hard-wiring is not required. The communication is compliant with ISA100.11a protocol specifications.

    Features:

    • Long Life Battery Design
      Ultra low current consumption design using two high capacity lithium-thionyl chloride batteries provide wireless operation for years.
    • Security Assured Wireless Network Joining
      Infrared communication between the devices for wireless network configuration and parameter setting.
    • Quick Update Time
      Selectable from 0.5 second to 60 minutes for measured process value to publish wirelessly.

    Standard Specifications:

    • WIRELESS SPECIFICATIONS
      Communication protocol: ISA100.11a protocol
      Data rate: 250 kbps
      Frequency: 2400 – 2483.5 MHz license free ISM band
      Radio security: AES 128 bit codified
      RF Transmitter power: Max. 11.6 dBm
      Antenna: +2 dBi Omni directional monopole type
      Separately sold remote antenna and antenna cables
      can be used.
    • POWER SUPPLY SPECIFICATIONS
      Battery:
      Use the dedicated battery pack.
      Rated voltage: 7.2 V
      Rated capacity: 19 Ah
      External Power Source:
      Rated voltage: 10.5 to 30 V DC
      Rated current: 36 mA
    • PERFORMANCE SPECIFICATIONS
      Zero – based calibrated span, linear output, wetted
      parts material code ‘S’ and silicone oil, in the
      continuous measurement mode unless otherwise
      mentioned.
      Specification Conformance
      EJX series ensures specification conformance to at
      least ±3σ.
    • NORMAL OPERATING CONDITION
      (Optional features or approval codes may affect
      limits.)
      Ambient Temperature Limits
      -40 to 85°C (-40 to 185°F)
      -30 to 80°C (-22 to 176°F) LCD visible range
      Process Temperature Limits
      -40 to 120°C (-40 to 248°F)
      Ambient Humidity Limits
      0 to 100% RH

    To learn about other Field Wireless Solutions like the EJX510B/EJX530B available at BBP, click here.

    DOWNLOAD BROCHURE

SEE ALL SOLUTIONS

Sales Inquiries & Customer Support

(800) 299-4142