Home / Signal Fire

SignalFire’s unique patent-pending two-way mesh technology provides the power and stability needed for reliable data transfer over long node-to-node distances.

  • a2 long range node signal fire

    A2 Long Range Node

    The SignalFire Remote Sensing System™ is a flexible adaptive radio networking system that seamlessly integrates analog and digital sensors. With a range of up to 3 miles, the system is self installing and self configuring. All the installer has to do is set the check-in frequency using a simple rotary switch, record the radio address, and connect the sensor. This system compares very favorably, from a cost perspective, with installed conduit at distances of 100 feet or more.

     

  • flow totalizer with display

    Flow Totalizer with Display

    The Flow Totalizer with Display is a C1D1 Intrinsically Safe Wireless Flow Totalizer. It features a local display with flow rate, totalizer and diagnostics. Additional features include: integrates with industry standard turbine meters, hazardous location classified for CL1 DIV1 Intrinsically Safe, robust 900mHz authenticated wireless protocol, 0.5 mile range, battery powered electronically optimized for long life (5 years+), real-Time-Clock with battery backup, 1” female NPT standard coupling with 2 pin connector inductive type turbine meters, configurable contract hour with real-time clock & battery backup, 30 day built-in local data historian/backup storage, wireless data interface to SignalFire’s standard protocol, weathertight rugged enclosure for outdoor operation and easy to install and maintain

     

    Learn more about products from Signal Fire available from BBP here.

  • signal fire gateway stick

    Gateway Stick

    This rugged, integrated device combines a high-gain antenna with gateway electronics in a single, easily mounted package.

    Gateway Stick combats a common problem with RF networks, which are increasingly used to monitor and control remote devices over tens or hundreds of square miles. Gateways traditionally have different location requirements for their electronics module and antenna, making it necessary to place them separately. Gateway Stick is a revolutionary solution that combines them into one easy-to-install component.

     

  • ModQ Sentry

    ModQ Sentry

    The ModQ Sentry is a C1D2 Non-Incendive Modbus Flow Totalizer. It features a local display with flow rate, totalizer and modbus settings. It can integrate with industry standard turbine meters. It also features local pushbuttons for configuration. Additional features include: Externally and/or battery powered with auto switch over, Real-Time-Clock with battery backup, 1” female NPT standard swivel coupling with 2 pin connector inductive type turbine meters, Configurable contract hour with real-time clock & battery backup, 32 day built-in local data historian/backup storage, Settable K Factor from local interface, Weathertight rugged enclosure for outdoor operation, Easy to install and maintain, and Configurable volume and time units.

  • MIOM-SingalFire

    Multi-I/O Stick System

    The Multi-I/O Stick System is designed to connect to a Modbus Stick and provide sophisticated wireless I/O control and monitoring at remote locations.  Ideal for Separator, Heater Treater, Plunger Lift and Other Applications.

     

  • signal fire pressure scout

    Pressure Scout

    The Pressure Scout is a Class 1, Division 1 Intrinsically safe system that powers integrated pressure sensor and radio for years with an internal battery. It features a rugged design for outdoor environments with an up to 1/2 mile range. Additional features include: ½” NPT Process connection standard, extremely low power and long battery life, compact and simple to install and maintain, available in standard pressure ranges and pushbutton or remote zeroing.

    Learn more about products from Signal Fire available from BBP here.

  • Signal Fire Sentinel

    Sentinel

    The SignalFire Sentinel wireless node connects to sensors and creates a wireless link between the sensor and a Gateway. This wireless node is intrinsically safe (Class 1, Division 1) and can interface to sensors via a variety of interfaces – Analog (4-20mA/1-5V), Modbus, HART, and Digital Input. The Sentinel has a range of 1/2 mile and is part of the SignalFire mesh network bring wireless connectivity to the oil field. The Sentinel wireless node will power the sensor, take the data, and send the data (via the SignalFire wireless mesh network) to the Gateway where the data is available via a Modbus RTU or TCP interface. This product line is powered by internal lithium batteries. C1D1 solar power option is available for sensors requiring long warm-up times or if an always-on sensor is desired. Sensor data along with diagnostic information is available at the Gateway. Learn more about process automation products available from BBP.

     

    DOWNLOAD BROCHURE
  • sentinel-bracket-kits

    Sentinel Bracket Kits

    The SignalFire bracket mounting kits provide everything necessary to mount a Sentinel-HART with a Sentinel-Solar to a sensor. Kits are available for the following devices: Vega Single Chamber Radar, Yokogawa EJA Series.

  • solar powered repeater node

    Solar Powered Repeater

    The Solar Powered Repeater Node permits extension of the SignalFire Wireless Mesh Network where power is not available. Complete stand-alone system for easy installation.

     

  • Tilt Scout

    Tilt Scout

    The Tilt Scout is a wireless solid state inclinometer that measures an angle from horizontal with two modes: Hatch detection and Pump Jack detection. The Hatch detection mode enables monitoring of the opening condition (closed, cracked open, opened) of a hatch for environmental and safety concerns. The Pump Jack detection mode detects and reports if it is operating or moving. The Tilt Scout can also be applied to a variety of other applications where there’s a need to detect an angle from horizontal.

    Learn more about products from Signal Fire available from BBP here.

     

  • Wireless I/O Modules

    Wireless I/O Module

    SignalFire Wireless I/O Modules include:

    • 4 Analog inputs (0-20mA or 0-5V)
    • 4 Analog outputs (0-20mA or 0-5V)
    • 2 Digital inputs
    • 2 Relay outputs (1 DPDT, 1 SPDT)
    • Powerful 300 mW radio with antenna kit
    • Wide range DC power input. 10 to 30VDC
    • DIN Rail Mount with pluggable screw terminal blocks
    • Status LEDs
    • Class 1 Division 2 Certified, Groups C&D, Temperature Code T5.  Certified to CSA C22.2 No. 213, Conforms to ISA 12.12.01

    The SignalFire Wireless I/O Module acts as a wire replacement that replicates analog and digital signals over a wireless link between a pair of Wireless I/O Modules. The modules are DIN rail mounted and designed to be easy to use.

    The Wireless I/O Modules can also be used with a standard SignalFire Gateway.